Product Code Database
Peracetic acid (also known as peroxyacetic acid, or Percidine) is an organic compound with the chemical formula CH3CO3H. This peroxy acid is a colorless liquid with a characteristic acrid odor reminiscent of acetic acid. It can be highly corrosive.
Peracetic acid is a weaker acid than the parent acetic acid, with a p Ka of 8.2.
Peracetic acid is conventionally prepared by combining acetic acid and hydrogen peroxide with homogeneous acid catalysts (e.g., sulfuric acid), which facilitate the reaction and achieve equilibrium between the reagents and product:
While it is feasible to create peracetic acid by combining consumer-grade vinegar (5% acetic acid) and hydrogen peroxide (3%) without an acid catalyst, the low concentration of reagents will result in a slow reaction rate at room temperature. Extrapolating from published reaction rates, the time to equilibrium is estimated to be on the order of weeks.
As an alternative, acetyl chloride and acetic anhydride can be used to generate a solution of the acid with lower water content.
Peracetic acid is also generated in situ by some laundry detergents. This is achieved by the action of , such as tetraacetylethylenediamine and sodium nonanoyloxybenzenesulfonate, upon hydrogen peroxide formed from sodium percarbonate in water. The peracetic acid is a more effective bleaching agent than hydrogen peroxide itself. PAA is also formed naturally in the environment through a series of photochemical reactions involving formaldehyde and photo-oxidant radicals.
Peracetic acid is always sold in solution as a mixture with acetic acid and hydrogen peroxide to maintain its stability. The concentration of the acid as the active ingredient can vary.
In the European Union, peroxyacetic acid was reported by the EFSA after submission in 2013 by the US Department of Agriculture.
Decontamination kits for cleaning fentanyl analogues from surfaces (as used by many police forces, amongst others) often contain solid peracetyl borate, which mixes with water to produce peracetic acid.
Production
Peracetic acid is produced industrially by the autoxidation of acetaldehyde:
Uses
The United States Environmental Protection Agency first registered peracetic acid as an antimicrobial in 1986 for indoor use on hard surfaces. Use sites include agricultural premises, food establishments, medical facilities, and home bathrooms. Peracetic acid is also registered for use in dairy and cheese processing plants, on food processing equipment, and in pasteurizers in breweries, wineries, and beverage plants. It is also applied for the disinfection of medical supplies, to prevent biofilm formation in pulp industries, and as a water purifier and disinfectant. Peracetic acid can be used as a cooling tower water disinfectant, where it prevents biofilm formation and effectively controls Legionella bacteria. Nu-Cidex is the trade name for a brand of antimicrobial peracetic acid.
Epoxidation
Although less active than more acidic peracids (e.g., m-CPBA), peracetic acid in various forms is used for the epoxidation of various (Prilezhaev reaction). Useful applications are for unsaturated fats, synthetic and natural rubbers, and some natural products such as pinene. A variety of factors affect the amount of free acid or sulfuric acid (used to prepare the peracid).
Safety
Peracetic acid is a strong oxidizing agent and severe irritant to the skin, eyes, and respiratory system. The U.S. Environmental Protection Agency published the following Acute Exposure Guideline Levels (AEGL):
1 The concentration at which the general population will experience transient and reversible problems, such as notable discomfort, irritation, or certain asymptomatic non-sensory effects. 0.52 0.17 2 The concentration that results in irreversible or other serious, long-lasting adverse health effects or an impaired ability to escape. 1.6 0.52 3 The concentration that results in life-threatening health effects or death. 4.1 1.3
See also
|
|
